Stamp for wax seal with the logo of your company or your Association
Warning: Last items in stock!
Seal for wax seal with the logo of your Company or Association
Diameter 20 mm, brass base thickness 15 mm, wooden handle varnished with golden nail to facilitate the direction of affixing.
Required to seal confidential folds, tenders or simply to give "seal" to a document or object.
Engraving of a simple logo (adapted to the size of the support).
The seals with the reproduction of coats of arms or complex designs must be the subject of an exchange of emails in order to determine the feasibility.
This seal is manufactured at the request of the customer, and it is unique. The engraving is done using a conical tungsten carbide cutter running at 25000 rpm, the end of which is measured under a microscope, the accuracy is 1/100 mm. The importance of the depth of etching subsequently makes it easy to read the wax seal produced and a perfect demolding when it is extracted from the wax. The attention paid to the strict respect of the rules of the Art during each realization is a pledge to obtain a seal of quality. Its individual composition is made according to the prescriptions received and it is delivered with a copy of the wax seal.
The normal manufacturing time is 72 hours, but on request, shipping can be made the day after the order. It is also necessary to allow 7 days for delivery by Colissimo International Suivi.
Send a personalized project and "Good To Pull" on simple request and after validation of your order.
Make sure that when you order, transfer the logo file as described in the "Order"
Before placing this seal in your shopping cart, you are invited in the CUSTOMIZATION tab above to download from your hard disk the image file (in .jpg, .bmp format but with a good resolution, 800x800 pixels for example ) Or better in .eps or .ai format (CS2 version) or simply a .pdf (Acrobat Reader) file to do the burning.
* required fields