Brass block only for hot stamp on wood diameter 20 mm with logo

Block for branding iron on wood diameter 20 mm with logo

Additional mark for branding iron for wood. Engraving of the brass base in relief diameter 20 mm, thickness 15 mm. Engraving of a logo or pattern, with or without framing.

Product customization

Don't forget to save your customization to be able to add to cart

.png .jpg .svg .pdf .ai .eps .psd
In Stock

Additional brass block for branding iron for wood. Engraving of the brass base in relief. Diameter 20 mm, thickness 15 mm. This brass block is to be mounted on the heated iron of a power of 60 watts previously supplied when purchasing the complete hot brand. Engraving of a logo, pattern, with or without circular frame.

The hot brand is more particularly intended to print the wood by burning.

This hot brand is manufactured at the customer's request, and it is unique. The engraving is done using a conical tungsten carbide milling cutter at 25000 rpm, the end of which is measured under a microscope, the accuracy is 1/100 mm. The importance of the relief makes it easy to read. The attention paid to the strict respect of the rules of the Art during each realization is a pledge to obtain a quality mark. Its individual composition is carried out according to the prescriptions received.

The normal manufacturing time is 5 to 6 days, but on request, shipping can be done faster. It is also necessary to allow 7days for delivery by Colissimo International Suivi.

Sending of a custom project and "Good To Pull" on simple request and after validation of the order.

Before putting this extra hot brand into your shopping cart, you are prompted to download the image file in the CUSTOMIZATION tab below.


Mode d'emploi marque chaud bois

Instructions pour utiliser la marque à chaud pour le bois

Download (222.21k)