Seal for seal wax diameter 15 mm, base brass thickness 15 mm, handle in varnished wood, with golden nail to indicate the direction when making the impression in the wax. Engraving of a very simple logo (adapted to the size of the seal) and a text also very short.
Warning: Last items in stock!
Seal for seal wax diameter 15 mm, base brass thickness 15 mm, handle in varnished wood, with golden nail to indicate the direction when making the impression in the wax.
Engraving of a very simple logo (adapted to the size of the support) and a short text highlighted in baton (Helvetica) to keep legibility.
The creation of a seal with a coat of arms or a coat of arms does not fall into this category.
Indeed, a seal with the reproduction of a coat of arms or a coat of arms very often requires engraving on several levels the different elements constituting the coat of arms in order to bring out the reliefs.
For any request for a seal with a coat of arms, please contact us by e-mail with the drawing of the coat of arms to draw up a quote.
This seal is manufactured at the request of the customer, and it is unique. The engraving is done using a conical tungsten carbide cutter running at 25000 rpm, the end of which is measured under a microscope, the accuracy is 1/100 mm. The importance of the depth of etching subsequently makes it easy to read the wax seal produced and a perfect demolding when it is extracted from the wax. The attention paid to the strict respect of the rules of the Art during each realization is a pledge to obtain a seal of quality. Its individual composition is made according to the prescriptions received and it is delivered with a copy of the wax seal.
The normal manufacturing time is 72 hours, but on request, shipping can be made the day after the order. It is also necessary to allow 7 days for delivery by Colissimo International Suivi.
Sending of a custom project and "Good To Pull" on simple request and after validation of the order.
Before placing this seal in your shopping cart, you are invited to indicate in the "CUSTOMIZATION" tab above the text to be burned and download from your hard disk the image file (in .jpg, .bmp format but d A good resolution, 800x800 pixels for example) or better .eps or .ai (version CS2) or simply a .pdf (Acrobat Reader) file to do the burning.
* required fields